Hyundai Tucson Plug-in Hybrid prices

Hyundai Motor America (Hyundai) is recalling certain 2025 Elantra N, 2026 Tucson, Tucson Hybrid, Tucson Plug-In Hybrid Electric (PHEV), and Elantra vehicles. The B-pillar impact sensors may have been misassembled, which can delay air bag deployment.

Hyundai Motor America (Hyundai) is recalling certain 2025-2026 Tucson Hybrid, Tucson Plug-In Hybrid Electric (PHEV), 2026 IONIQ 5, Santa Cruz, Kona, Palisade, Palisade Hybrid, Santa Fe, Santa Fe Hybrid, Sonata, Sonata Hybrid, and Tucson vehicles. Due to a software error, the instrument panel display may fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Controls and Displays."

Some vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption – Inspection & Repair Guidelines, or the latest revision.

Certain Santa Fe Hybrid (TM HEV), Santa Fe Plug-in Hybrid (TM PHEV), Tucson Hybrid (NX4 HEV), and Tucson Plug-in Hybrid (NX4 PHEV) vehicles may experience intake air line freezing and Exhaust Gas Recirculation (EGR) valve corrosion due to excessive condensation accumulating within the EGR system. This condition can lead to drivability concerns related to the following DTCs: • P040400: (Exhaust Gas Recirculation Control Circuit Range) • P049D00: (EGR 'A' Control Position Exceeded Learning Limit) • P047100: (Exhaust Pressure Sensor 'A' Circuit Range/Performance) • P012800: Coolant Thermostat (Coolant Temperature below Thermostat Regulation Temperature) • P262B00: (Control Module Power Off Timer Performance) • P050C00: Cold Start Engine Coolant Temperature Performance • P1DFD00: (EVAP System Purge Pump Target Speed) • P2DFD00: (EVAP System Purge Pump Performance) • P112000: (Inlet Metering Valve – Malfunction) • P033500: (Crankshaft Position Sensor A) The bulletin below provides instructi

Certain Santa Fe Hybrid (TM HEV), Santa Fe Plug-in Hybrid (TM PHEV), Tucson Hybrid (NX4 HEV), and Tucson Plug-in Hybrid (NX4 PHEV) vehicles may experience intake air line freezing and Exhaust Gas Recirculation (EGR) valve corrosion due to excessive condensation accumulating within the EGR system. This condition can lead to drivability concerns related to the following DTCs: • P040400: (Exhaust Gas Recirculation Control Circuit Range) • P049D00: (EGR 'A' Control Position Exceeded Learning Limit) • P047100: (Exhaust Pressure Sensor 'A' Circuit Range/Performance) • P012800: Coolant Thermostat (Coolant Temperature below Thermostat Regulation Temperature) • P262B00: (Control Module Power Off Timer Performance) • P050C00: Cold Start Engine Coolant Temperature Performance • P1DFD00: (EVAP System Purge Pump Target Speed) • P2DFD00: (EVAP System Purge Pump Performance) • P112000: (Inlet Metering Valve – Malfunction) • P033500: (Crankshaft Position Sensor A)

Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.