EngineOct 2, 2026
MY 2026 · Service Bulletin/Repair Instructions · TPI-LB634.07.26
This document is a technical product information with operating procedures and instructions to be implemented IF and only IF the vehicle presents specific sporadic DTCs and MIL. In such cases Lamborghini requests the dealer network to install injector covers to guarantee the vehicle performance.
WheelsJul 13, 2026
MY 2026 · Service Bulletin/Repair Instructions · L634-A.14.26
Supplier informed about the potential corrosion of the carbon rim Circlips due to treatment issue. The impact is only aesthetic and not functional however the component does not respect quality standards. One vehicle involved in USA.
Structure: BodyMay 26, 2026
MY 2026 · Service Bulletin/Repair Instructions · L634-A.02.26
During ongoing product monitoring, Automobili Lamborghini S.p.A. requires reworking of the sound symposer with the introduction of a closing plate and replacement of a bushing.
Power TrainMay 5, 2026
MY 2026 · Service Bulletin/Repair Instructions · L634- A.12.26
Some gearboxes may have been assembled without an air vent grille, this item prevents the ingress of dirt and other debris. The operation requires verification and possible remounting of the P1 air vent grille.
EngineApr 21, 2026
MY 2026 · Service Bulletin/Repair Instructions · L634-A.10.26
The positioning cable tie of lambda sensor cable may not be fixed appropriately. A damaged lambda sensor cable may trigger a check engine light.
Electrical SystemApr 20, 2026
MY 2026 · Service Bulletin/Repair Instructions · L634-A.11.26
Generic baseline software update with performance improvement package for multiple systems.
EngineMar 6, 2026
MY 2026 · Service Campaign · L634-A.07.26
Service action to the rerouting of the HV coolant pipe that on some vehicles may have been assembled out of position.
SteeringMar 5, 2026
MY 2026 · Service Campaign · L634-A.06.26
During ongoing product monitoring, Automobili Lamborghini S.p.A. noted that on some steering wheels the rotary switches for drive mode selection can remain stuck in half position after release. This position does not affect the drivability or disturb the drive modes during drive in any way.