Rivian R1S prices

Rivian Automotive, LLC (Rivian) is recalling certain 2025-2026 R1S and R1T vehicles. One or both front turn signals may fail to illuminate and flash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Rivian Automotive, LLC (Rivian) is recalling certain 2022-2025 R1T and 2022-2026 R1S vehicles. The bolts that secure the second-row driver and passenger side seat belt retractor assemblies may be improperly tightened.

Rivian Automotive, LLC (Rivian) is recalling certain 2022-2025 R1S and R1T vehicles that previously had service performed. The toe link may have been reassembled incorrectly during service procedures performed before March 10, 2025.

Rivian Automotive, LLC (Rivian) is recalling certain 2025 R1S and R1T vehicles operating a software version prior to 2025.18.30. The Hands-Free Highway Assist (HWA) software may fail to correctly identify a lead vehicle.

Rivian Automotive, LLC (Rivian) is recalling certain 2025 R1S and R1T vehicles. An improperly grounded connection inside the High Voltage Distribution Box (HVDB) may cause a loss of drive power.

Rivian Automotive, LLC (Rivian) is recalling certain 2025 R1S and R1T vehicles. One or both front turn signals may fail to illuminate and flash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Rivian Automotive, LLC (Rivian) is recalling certain 2022-2025 R1T and R1S vehicles. The D-ring bolts for one or both front seat belt anchorage assemblies may not have been properly installed.

Rivian is launching a technical service bulletin for some model year 2022-2026 R1T and R1S vehicles that might have an audible rattle originating from the B-pillar area when driving on rough road surfaces. Upon customer complaint, Rivian will apply anti-rattle tape near both 1st row seat belt retractors to prevent rattling.

Rivian is launching a technical service bulletin for some model year 2022-2024 R1T and R1S vehicles that might have bubbles in the painted surfaces below the exterior door handles. On these vehicles, adhesive that secures an inner door reinforcement could allow contaminants to corrode the inner surface of the door over time, affecting the visual appearance of the door surface. Upon customer complaint, Rivian will repair and refinish the affected door(s). Note: This document supersedes RSB-56-25-002-1. Revision 2 updates the instructions for using the air wedge and inspecting the door panel prior to use.

Rivian is launching a technical service bulletin for some model year 2022-2024 R1T and R1S vehicles that could have inadequate adhesion between the outer door panel and an internal reinforcement. On affected doors, the exterior door handle might not sit flush with the outer door panel or might move slightly when the handle is operated. Upon customer complaint, Rivian will apply new adhesive between the reinforcement and the outer panel.

Rivian is launching a technical service bulletin for some model year 2022-2024 R1 vehicles that may have ultrasonic sensors detached from the front fascia mounting area. After detachment, the ultrasonic sensor may become dislodged and hang inside the front fascia, causing customer notifications for sensor issues and potential sensor damage. Upon ultrasonic sensor detachment, Rivian will perform an ultrasonic sensor repair to secure the sensor to the front fascia.

Rivian is launching a technical service bulletin for some model year 2022-2024 R1T and R1S vehicles that may be susceptible to water ingress in the front HVAC assembly. This may result in damp or soggy carpets in the front of the vehicle. Upon customer complaint of wet carpet in the front of the vehicle, Rivian will inspect the component and replace any damaged parts, and reseal the case to prevent further water ingress.